这是有关如何通过修改后的 TamaSma 卡向 Tamagotchi Smart 添加/插入自定义内容的指南。
*注：我不支持盗版。请不要使用此方法将不属于您的 TamaSma 卡转储文件加载到您的电子宠物中，并且仅将其与您已经拥有的 TamaSma 卡一起使用。
你需要什么
- 任何 TamaSma 卡（或者，您也可以使用 Digimon DIM 卡）。注意：做好准备，您将用您自己的自定义内容覆盖其内容。
- 硬件：
- CH341A迷你编程器。您可以从速卖通等网站获取它。
- 读卡器
- 6 根母对母跨接电缆
- 作为 Windows 程序员
- TAMASUMA 工具- 这是 Studded 创建的一个工具，用于修改 TamaSma 卡转储文件
注意：我的分步指南仅作为快速指南。如需更全面的指南，我们鼓励您使用以下资源：
分步指南
第 1 步：从 TamaSma 卡中提取转储文件
- 将 TamaSma 卡连接到 CH341A，并将 CH341A 连接到 Windows 计算机。
- 请按照本指南了解如何使用 AsProgrammer 使用 CH341A 读取 TamaSma 卡，并提取 TamaSma 卡的转储文件。
- 将转储文件保存到 Windows 计算机上。注意：保存原始 TamaSma 卡转储的备份，并对文件的副本进行修改。要将 TamaSma 卡恢复到原始状态，需要原始备份。
步骤2：修改转储文件
- 将转储文件的副本上传到 Studded 的TAMASUMA 工具上。在这里，您可以对转储文件进行必要的修改，例如更改壁纸、精灵或删除设备 ID。
- 完成必要的修改后，单击“导出”导出修改后的转储文件并将其保存在 Windows 计算机上。
步骤 3：将修改后的转储文件放回 TamaSma 卡
- 将 TamaSma 卡连接到 CH341A，并将 CH341A 连接到 Windows 计算机。
- 请按照本指南了解如何使用 AsProgrammer 对 TamaSma 卡重新编程并将转换后的文件插入 TamaSma 卡（这将覆盖 TamaSma 卡中的现有数据）。
免责声明：上述步骤需要一定水平的技术知识。我对损坏/变砖的设备不承担任何责任。
2 条评论
First of all, ignore that last person, thank you for the guide! They just don’t know how to read apparently.
Second of all, I am posting these instructions for anyone else who may struggle with what to do once they’ve edited the save file. The video stops short of explaining how to do this correctly and the AsProgrammer guide doesn’t do a good job of explaining either. These steps worked for me, but if they don’t for you, you’ll have to figure it out on your own. It took quite a bit of trial and error on my part before I stopped getting error messages in the console on AsProgrammer or on my smart. Hopefully it helps someone!
Step 1- Connect to PC using CH341A.
Step 2- Open AsProgrammer and “Read ID” to detect chip. Select first option. This only has to be done when first opened or if you change chips.
Step 3- Next, “Read IC” to view the code.
Step 4- “Unprotect” to allow overwriting the chip.
Before proceeding!!! If this is your first time using the chip, make sure to “Save file” using the floppy disk to your computer first! Save as a .bin file! This is important as this will remain your clean copy in case you want to revert or have any problems! It will also be the file you upload into the tool to edit the icons.*
Step 5- “Erase IC” to clear the code off.
Step 6- Click the arrow next to “Verify IC” and click “Blank check” in the drop down. Ensure no errors come up in the console below.
Step 7- Open updated bin file in AsProgrammer using the folder icon. You should see the code change somewhat.
Step 8- “Program IC” to write the new bin file to the chip.
Step 9- “Verify IC” once the writing process finishes to ensure no errors come up in console below.
Step 10- Click the arrow next to “Unprotect” and click “Set the protection bits” to reprotect the chip.
Step 11- Can run another “Verify IC” to be safe. If no errors come up in the console below you should be good to go!
Thank you so much can’t wait to try this. Thanks for all the hard work you put into doing a guide and giving us the resources to find a way to do customize our tama babies.
Thank you,
Steffie